Product ID:1751B ALUMINUM EPOXY ADHESIVE
MSDS Date:10/22/1990
FSC:8040
NIIN:00-181-7548
Kit Part:Y
MSDS Number: BPTWN

3/M COMPANY

3M CENTER
ST. PAUL, MN 55144
US

Emergency Phone: 612-733-1110

Info Phone: 612-864-2310

Preparer: C.A. EISENHARD

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

EPOXY RESIN

CAS: 25068-38-6

Fraction By Weight: 40-50%

ALUMINUM PIGMENTS

CAS: 7429-90-5

Fraction By Weight: 30-40%

OSHA PEL 15 MG/M3 AL

ACGIH TLV: 10 MG/M3

CLAY

CAS: 68953-58-2

RTECS: GF1670500

Fraction By Weight: 1-10%

N-BUTYL GLYCIDYL ETHER

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 1-10%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

AMORPHOUS SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-10%

ACGIH TLV: 3 MG/M3

RESORCINOL

CAS: 108-46-3

RTECS: VG9625000

Fraction By Weight: 1-10%

OSHA PEL 10 PPM/20 STEL

ACGIH TLV: 10 PPM/20 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Effects of Overexposure:EYE: PRODUCT MAY BE IRRITATING TO EYES UPON
DIRECT CONTACT. SKIN: PRODUCT MAY BE IRRITATING TO SKIN ON
PROLONGED OR REPEATED CONTACT. THE EPOXY RESIN IN THIS PRODUCT IS A
SKIN SENSITIZER, ESPECIALLY F OR CERTAIN SUSCEPTIBLE INDIVIDUALS.
INHALE: MAY BE IRRITATING TO NOSE AND THROAT. INGEST: ORAL TOXICITY
IS NEGLIGIBLE.

First Aid:EYE: IMMEDIATELY FLUSH W/WATER 10 MINUTES. CALL PHYSICIAN.
SKIN: WASH THOROUGHLY WITH SOAP AND WATER. INHALE: MOVE PERSON TO
FRESH AIR. CALL PHYSICIAN. INGEST: DO NOT INDUCE VOMITING.
IMMEDIATELY CALL PHYSICIAN OR POISON CONTROL CENTER.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICALS, WATER
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH SELF-
CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.

Spill Release Procedures:VENTILATE AREA. COLLECTED SPILLED MATERIALS.
PLACE IN U.S. DEPARTMENT OF TRANSPORTATION APPROVED METAL
CONTAINER, SEAL.

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:USE ONLY WITH SUFFICIENT VENTILATION TO MAINTAIN
VAPOR CONTENTRATIONS BELOW RECOMMENDED EXPOSURE LIMITS. AVOID
BREATHING VAPORS RELEASED DURING HEAT CURING.
Ventilation:CURING EQUIPMENT SHOULD BE PROPERLY VENTED TO THE OUTDOORS
OR SUITABLE EMISSION CONTROL DEVICE.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES/CHEMICAL GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING AS NECESSARY TO PREVENT
SKIN CONTACT.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
FOR INDUSTRIAL USE ONLY. THIS MATERIAL IS PART OF A TWO COMPONENT
SYSTEM. THE PRECAUTIONS FOR EACH COMPONENT SHOULD BE OBSERVED WHEN
SEPARATE OR MIXED.

HCC:V7
Spec Gravity:CA1.300 WATER=1
Solubility in Water:VERY SLIGHT
Appearance and Odor:GRAY VISCOUS PASTE, LITTLE ODOR.

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR BURNING MAY
PRODUCE C, H, N DECOMPOSITION PRODUCTS.

Waste Disposal Methods:MIX PART A W/PART B. COMPLETELY CURE/DISPOSE OF
CURED PRODUCT IN SANITARY LANDFILL. INCINERATE UNCURED BULK PRODUCT
AFTER MIXING W/FLAMMABLE MATERIAL IN INDUSTRIAL/COMMERCIAL
FACILITY. DISPOSAL SHOULD BE IN ACCORDANCE WITH APPLICABLE
REGULATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.